Bent flat Bar is frequently used in tank stiffeners, matching flanges, curved lintels, hand rails, curved stringers, pipe clamps and kick rails on circular platforms.
Bars can be bent with virtually every bending process.
For very tight radius bending you can utilize a draw bending process where you must be pull the material (draw the material) around a bend die matching the desired bend radius.
But for larger or sweeping radii must be utilize a roll bending process (section bending).
What is flat bar bending?
Flat bar can be bent both the easy way (against the weak axis) and the hard way (against the strong axis).
Flange bending machine have the ability to bend flat bar the hard way for any thickness .And have the ability to bend flat bar the easy way for any thickness.
Selection table of BIT profile bending machine for bending flat bar
Bar materials can come in various shapes and sizes. BIT Series Flat bar bending machine ( Profile Bending Machine ) can be ability to bend round bar, square bar and flat bar. All of these shapes are solid.
|Model||Hard Way X-X Axis||Easy Way Y-Y Axis|
|Specification (mm)||Minimum Inside Diameter (mm)||Specification (mm)||Minimum Inside Diameter (mm)|
|W24S-16||80× 10||800||180× 20||500|
|W24S-45||100× 25||700||200× 35||600|
|W24S-75||120× 25||1000||250× 30||1000|
|W24S-140||150× 30||1500||250× 40||1000|
|W24S-180||175× 40||1500||350× 50||900|
|W24S-250||200× 50||2500||400× 60||2000|
|W24S-320||250× 70||3500||450× 70||1000|
|W24S-400||250× 70||3500||500× 80||1200|
|W24S-500||300× 70||4000||500× 100||1600|
|W24S-600||300× 80||5000||650× 100||2000|